Applies to versions: 2.1, 2.2, 2.3, 2.4, 2.5
Relay Control: Manually Test Relay Channels and/or connected devices
The Network Clock is primarily used to clock in and out. The clock also offers a System Menu which can be used to configure the device and access other functions. This article covers how to Test Relays.
When using the TimeIPS Relay Control unit with the clock, it is often helpful to test each relay by hand before configuring relay timers and triggers in the TimeIPS server.
To do this, start from the main screen and press Enter without a badge number to enter the system menu. Then, go down to Test Relays. Each time you press Enter on one of the Toggle Relay entries, the relay will turn on/off. You should hear a slight "click" sound in the relay controller and the connected device should turn on/off.
System Menu (aka System Admin)
- Press Enter again without a Badge number.
- Update Settings
- Configure Network
- Play Test Sound
- Use Biometrics
- View System Info
- Synchronize NTP
- Fetch Time
- Set Volume
- Set Contrast
- Test Relays
- Toggle Relay 1
- Toggle Relay 2
- Toggle Relay 3
TimeIPS Network Clock Menu (2.1, 2.2, 2.3, 2.4, 2.5)
©2004-2017 TimeIPS, Inc. All Rights Reserved -
TimeIPS and the TimeIPS logo are registered trademarks of TimeIPS, Inc.
"Intelligent Personnel System" "Run your Business. We'll watch the clock." are trademarks of TimeIPS, Inc.
TimeIPS is protected by one or more patents. Patent No. US 7,114.684 B2.