Time clock systems by TimeIPS
Call Now! 316-264-1600
Information
Sales
Support
Knowledge Base Search:  
Main Menu
· Home

· Table of Contents
· Article Index

· Downloads
· New Features
· FAQ
· News
· Web Links

  
TimeIPS Knowledge Base

Table of Contents: Article IndexPrintable Version

Applies to versions: 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2



Backups



Backing up your TimeIPS data is critical. TimeIPS provides several backup options to ensure the safety of your TimeIPS data. Use the Backup Administration page to configure these options.

 

Module/Account Requirements

  • TimeIPS Off-site backups require an active Off-site Backup Account. This can be purchased or extended by contacting your sales representative.
  • Automatic and manual FTP/SFTP backups require either an active Off-site Backup Account or the Automatic Backup Options (IPSABO) module.
  • Automatic E-mail backups require either the IPSABO or IPSIPS module. Manual E-mail backups can be sent at any time.
  • There are no module or account requirements to create a backup as a local file to save to your personal computer.

 

Network Requirements

  • If you are using TimeIPS Off-site backups and you have a firewall or router then certain ports must be opened. View the list of required ports on the Ports Used By TimeIPS article.
  • If you are using FTP or SFTP backups then your TimeIPS server must have an open route to communicate with the FTP/SFTP servers you wish to use.
  • If you are using automatic Email backups then your TimeIPS system mail server settings must be configured correctly.

 

NOTE: All TimeIPS backup options create an encrypted file of your TimeIPS data. You should not attempt to open the encrypted file as this can cause file corruption, destroying the integrity of your backup file. Only TimeIPS systems can decrypt and install a TimeIPS backup.

 

 

 


Using the left pane Main Menu » Administration, click on: System » Backups

Main Backup Configuration

Content Included: Backups include all TimeIPS data including system settings but not network configuration. A TimeIPS system restored from a backup needs to have network settings reapplied. Backups include company logos and small employee photos up to 100k in size. Larger photos and company documents are not included unless you check the option to "Include User Media" in the general backup configuration.

 

 

 

 

Automatic Backup Configuration

Backups can be transmitted daily to TimeIPS Off-site Backup Servers, automatically to an E-mail address, FTP server, and/or SFTP server of your choice. Automatic backups to E-mail, FTP, and/or SFTP servers can be scheduled to happen at specific times of the day with the IPSABO module.

 

 

    TimeIPS Off-site Backups

    Backups can be saved as local files or off-site backups. Off-site backups provide the most security against disaster.

    To increase your size limit or extend your backup expiration date for TimeIPS Off-site backups contact your sales representative. If you have recently purchased Off-site backups but they are not registering on your system you can click the "Check Account Now" link on the Backup Administration page.

     

     

     

    Automatic Email Backups

    To configure automatic E-mail backups begin by clicking the check-box next to "Enable." Supply the destination E-mail address and an optional value for max size. A max size of 0 will mean no maximum. Check that the E-mail server in question can handle large attachments. Options for E-mail in the general configuration options will apply as well.

 

 

 

    Automatic FTP/SFTP Backups

    FTP and SFTP backups can both be configured to run automatically. Begin by clicking the check-box next to "Enable" for one or both methods.

  • Server: Identify the FTP/SFTP server address to use. This can be an IP like 192.168.1.63 or a domain name like ftp.company.com

  • Port: Identify the port number to use. Traditionally FTP uses port 21 and SFTP uses port 22

  • User: Supply the user-name for TimeIPS to use when accessing your FTP/SFTP server

  • Password: Enter the password for TimeIPS to use when accessing your FTP/SFTP server

  • Toggle Passive (FTP only):Checking this box will cause TimeIPS to send the "passive" command before it attempts to upload the backup file. Whether or not this is necessary depends on the FTP server's configuration. When configuring FTP backup settings attempt to send a backup with Toggle Passive on. If the FTP upload fails then uncheck Toggle Passive and try again.

  • Path: This is the path that TimeIPS will attempt to use when uploading your backup file. It can be an absolute path or it can be relative to the FTP user's default directory. If the directory does not exist or if the FTP user does not have permission to use it then the backup will still be uploaded to the FTP user's default directory.

  • Max Size: Specify the maximum file size in MB to attempt to upload. A backup file that exceeds this size will not be transmitted. A value of 0 or blank means there is no maximum.  

  • FTP and SFTP backups also follow the appropriate options selected in General Backup Configuration Options.

 

 

 

    Advanced Backup Scheduling

    This option requires the IPSABO module. With IPSABO you can schedule the hour of the day that automatic E-mail, FTP, and SFTP backups will attempt to transmit. To add scheduled backups select a time of day from the drop down menu that says "None". To delete a scheduled backup change the time of day to "None". You can schedule one backup of each type to happen up to once per hour every day.

    NOTE: To add additional scheduled backups, click the "Save Changes" button and then a new  ------ None ------  drop down will appear.

    If a scheduled backup fails to send for any reason it will be reattempted every hour until it is successful or until the system encounters another scheduled backup of the same type.

 

 

 

    General Configuration

  • Include User Media: Check this option to include large employee photos and company documents in your backup. This is disabled by default because it can drastically increase the size of your backups.

  • Status Alerts: Check this option to be alerted by E-mail when a backup is within 15% of exceeding the maximum allowed size or when a backup exceeds the allowed size. Additionally, for TimeIPS Off-site backups this option will send E-mail alerts when the backup account expires or is about to expire.

  • Success Notifications: Check this option to be alerted by E-mail when a backup is successfully created and sent. For automatic E-mail backups this option will only indicate if the E-mail was sent; it can not indicate if the backup was received by the target E-mail address.

  • Failure Notifications: Check this option to be alerted by E-mail when a backup failed to be created or failed to be sent.

  • Alerts for FTP, SFTP, and E-mail backups go to the E-mail address on file for every Full Access user. If there are no addresses on file then alerts are sent to the admin E-mail address for the Top Level Division on the Company/Divisions page. Alerts regarding TimeIPS Off-site backups are sent to the admin E-mail address.

 

 

 

    Backup Compression Preference

    Backups can be generated using one of two compression methods.

  •  Choose Smaller to generate smaller backup files.

  • Choose Faster to generate backup files faster.

 

 

 

 

 

Manual Backup Creation

Backups can also be transmitted manually to E-mail, FTP, and/or SFTP at any time or can be saved as a file on your personal computer. To manually create a backup scroll down to the Local Backup section.

  • To create a local file backup of the entire system, leave the drop down selector on "Save to file" and click the Create Backup button.
  • Companies with Multiple Divisions can create a local file backup for just one division by selecting "Save to file (Single Division)", then Select the Division and click the Create Backup button.

     

    NOTE: The Single Division backup can be loaded as a stand alone or imported to a new division.
    TIP: A Root User must be assigned in order to run a backup. If no Root User is assigned then the option to backup a Single Division will not appear in the dropdown menu. To assign a Root User, add an Employee to the the "Full Access" Permission group on the Permissions page.
  •  

  • To manually send an E-mail, FTP, or SFTP backup select the appropriate option from the drop down list, enter the corresponding information and click the Create Backup button. The page will refresh and you will be presented with the status of the backup as it is being created.

Once the backup is complete, it will appear in the Backup History table below along with a link to download the file. If you chose "Save to file" it is critical at this stage that you right click on the download link and save the backup file to a secure location.

 

 

 

 

 

Backup History

To review your backup history scroll down to the Recent Backup History section

The table lists the results of the most recent backup for each type. If the time is blue it means your TimeIPS server still has the associated backup file which you can choose to right click and download.

 

 

To view your full backup history click on the View Full Backup History link or the Backup History  icon at the top of the page.

 

To Clear your full backup history click on the Clear History icon at the top of the Backup History page.

 

 

 

 

Restoring From A Backup

To restore from backup with the backup file follow directions in Restore From Local Backup.

To restore from a TimeIPS Off-site backup follow directions in Restoring an Off-site Backup.



See Also:
Restoring From An Off-site Backup (1.8, 1.9, 1.10, 1.11, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)
Restore A Backup (2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)
TimeIPS Services, Including TimeIPS Offsite Backup Account (1.8, 1.9, 1.10, 1.11, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)

Was this article relevant to your question? Yes No
©2004-2023 TimeIPS, Inc. All Rights Reserved - TimeIPS and the TimeIPS logo are registered trademarks of TimeIPS, Inc.
"Intelligent Personnel System" "Run your Business. We'll watch the clock." are trademarks of TimeIPS, Inc.
TimeIPS is protected by one or more patents. Patent No. US 7,114.684 B2.