Applies to versions: 3.1, 3.2

Jobs

Job Administration allows you to configure jobs, manage employee job membership, pay rates, and configure job tracking on specific jobs and projects. You can also assign jobs to customers and organize your jobs by assigning them to categories. The IPSIPS optional module is required.  The IPSJOB module provides additional options including unlimited numbers of jobs.

Using the left pane Main Menu » Administration, click on: Jobs » Jobs

ADD A NEW JOB

• Click the + (plus) sign to the left of the Add a New Job bar to expand the window.

• Job Name: If a computer monitor is connected directly to your TimeIPS time station, the Long Name displays when employees clock in and out of a job. Long names must be unique within each job category. Maximum 24 characters.
• Small Display Name: The job Short Name displays on the TimeIPS LCD display when employees clock, and on some reports. Maximum 14 characters.
• (Optional)Category: Job categories can be used to help organize jobs. Set up the categories before entering jobs by using the Job Categories link from the Jobs menu in TimeIPS.
• (Optional) Manager: If a manager is selected for a job, that employee can have the special ability to edit time events where an employee worked the job. For this to work, the employee must also have the Job Manager permission group, and within that group, the option to "Edit" must be selected for "Clock Events" for "Employees working on jobs you manage." Note that a job manager must still have the ability to view clock events for all employees that might work their job, as without view permission, the edit permission alone will not cause the employee to be visible.
• (Required for Validated jobs) Job Code: A Job Code can be 1-12 alpha-numeric characters in length. Each Job Code must be unique. Employees clock in and out of jobs using the this job code. The employee will enter the job code from the TimeIPS numeric keypad, from an alpha-numeric computer keyboard connected to TimeIPS (PS2 or USB), or with a barcode scanner when clocking in/out of jobs.
  NOTE: The TimeIPS 8150 Series Barcode Reader requires a minimum of 4 characters. The TimeIPS LS4000 Series Barcode Reader will read 1-12 characters.
  NOTE: Job Codes can include numbers, capital and lower case letters, and dashes. Job Codes are case sensitive.
• (Optional) Copy From: If you select an existing job from this list and press "Create Job", a new job will be created with the settings from the copied job.
• (Optional) Description: Enter a description of the job for reference, if desired.


• Click on the Add New Job button to add your new job.

ENTER JOB DETAILS or EDIT AN EXISTING JOB

• Click the + (plus) sign to the left of the Job Name to expand the window.

General Tab

• Enter or edit the job details as needed. (Refer to the descriptions above under "Add A New Job".)
NOTE: In TimeIPS versions older than 3.0, jobs were able to be deactivated in certain instances. Now there are 5 options on ways to use a job. If they are all unchecked, then the job is "inactive" and will not show on the jobs admin page unless you choose to see inactive jobs.
• To enable the following options, check the corresponding boxes.
  • Connect this job to time events.
  • Allow this job to be an Employee's Default Job.
  • Allow employees to clock into this job.
  • Allow employees to Remote/Web clock into this job.
  • Make this job available for piecework tracking.
• To Delete This Job, click the corresponding button. You will no longer be able to use this job and it will be removed from your list of jobs.
  Note: If you delete a job, and it's in use by time events, piecework, default job, etc, a pop-up will list what and how many instances will be disconnected. If you proceed, it will remove the job.

Billing Tab

• The Control Number can be used to link job codes to another application you might be using, such as payroll software. It can have a maximum of 8 digits.
• GL (General Ledger) Number can be used to indicate an account number associated with the job. It can have a maximum of 32 characters.
• The Subcode Number can be used to track, classify, or associate this job. It can have a maximum of 32 characters.
• The Alternate Number can be used to track, classify, or associate this job. It can have a maximum of 32 characters.
• Each job can be assigned a Billing Rate that will display on the Extended Employee/Job Report. This rate will not be used to calculate the employee's gross pay for each job. You can, however, use functions within your spreadsheet application to create gross billing calculations.
• Jobs can be assigned to specific Customers. Set up the Customers before entering jobs by using the Job Customers link from the Jobs menu in TimeIPS.
  NOTE: You can create Customer and/or Category information at a later time and assign jobs accordingly for reporting purposes.
• Be sure to click the Save Row button when you are finished.

Pay Rates Tab

Each job can be assigned a specific Pay Rate that will be applied to any employee who works this job, as long as a specific job rate has not been assigned to that employee.

• To add a job Pay Rate:
  
  • Enter the Hourly Rate, Hourly Differential, or Rate Multiplier percentage.
    
    • Hourly Rate: An employee working this job will earn this rate instead of his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration). Enter as a dollar amount.
    • Rate Multiplier: An employee working this job will earn his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration), multiplied by this percentage. Enter as a number. Do not enter a percentage sign.
    • Hourly Differential: An employee working this job will earn his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration), plus this differential. Enter the dollar amount to be added to the employee's base rate (i.e., .25 for twenty-five cents).
    NOTE: Only one of the above pay rate types may be assigned per job.
  • Select a Pay Type.
  • Decide if it Counts toward OverTime.
  • Add the date and time the rate becomes Effective.
  • Click the Add button to apply the rate.

  

  • Once it's added, click on the Edit button to make changes to the rate, add an expiration date, or delete the pay rate entry all together.

  

• To see a list of all the changes that have been made to pay rates, click the View Audit History button.

Override Rates Tab

Each job can be assigned specific pay rates per employee. This is done on the Override Rates tab which allows you to view and edit the individual employee job pay rates.

• Click on the Add Employee Rate button. 

• Choose the Employee from the drop-down box and click on OK to continue or Cancel to close the window.
• After clicking on OK, the job rate option fields will appear below the name of the employee you selected.

• Enter the Hourly Rate, Hourly Differential, or Rate Multiplier percentage.
  
  • Hourly Rate: An employee working this job will earn this rate instead of his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration). Enter as a dollar amount.
  • Rate Multiplier: An employee working this job will earn his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration), multiplied by this percentage. Enter as a number. Do not enter a percentage sign.
  • Hourly Differential: An employee working this job will earn his/her usual hourly rate (defined in the employee's Employment tab in Employee Administration), plus this differential. Enter the dollar amount to be added to the employee's base rate (i.e., .25 for twenty-five cents).
  NOTE: Only one of the above pay rate types may be assigned per employee for this job.
• Select a Pay Type.
• Decide if it Counts toward OverTime
• Add the date and time the rate becomes Effective.
• Click the Add button to apply the rate.

• Once it's added, click on the Edit button to make changes to the rate, add an expiration date, or delete the pay rate entry all together.

• Each employee that has been assigned an individual job rate will be listed by Name and Current Rate.
• To review all job rates that have been assigned to an individual employee, click on the Employee Rate Audit History button for that employee.

Coverage Tab

Each job can be assigned coverage rules.  If the number of employees clocked into the job violates the rules, email alerts can be sent and the violations can be viewed with the "View Violation History" button.

• To add a new coverage rule, click the Add New button.

• Enter a Starting and Ending day and time, as well as the Minimum and/or Maximum number of employees that are allowed to be clocked in during this time.
• While this schedule rule is in effect, an alert will be sent if fewer than the minimum and more than the maxmum employees are clocked in beyond the Coverage Grace Period. This alert will be sent to the email address you enter in the Employee Alert E-Mail field. To stop sending alerts, uncheck the Send E-Mail Alerts box.
• Click the Save Row button to impletment the rule.

• Click the View Violation History button to see a list of all the violations that have been made to your coverage rules.

• Use the left arrow to view previous weeks and the right arrow to return back to more recent weeks.

Default Membership Tab

Employees can be assigned to a specific job by default. When employees clock in, they are automatically signed into the default job unless they manually choose a different job. 

• To change an employees default job, click on the employee's name. 
• Choose that employee's new default job from the drop down list, and then click the Change Default Job button.

Membership Tab

Each job can be assigned a specific set of employees. 

• To add an employee to the job, click on the employees name in the left column labeled Other Employees, then click the blue arrow pointing to the right. The employee's name will then appear in the right column labeled Employees In This Job.
  TIP: To select multiple employees, hold down the Ctrl key while clicking on employees' names.

Membership Restrictions Tab

The job can be restricted to allow only certain employees to clock in to that job.

• No Restriction: All employees will be able to clock in to this job.
• Restrict to Members and Default Members: Employees on the Membership tab and Employees that have this job configured as their Default Job will be able to clock in to this job.
• Restrict to Members Only: Only employees listed on the Membership tab will be able to clock in to this job. Employees that have this job configured as their default job, but are not members, will not be able to clock in to this job.
• Restrict By Expression: Employees will not be able to clock in to this job if the expression evaluates to "deny". If there is an error evaluating the expression, employees will still be allowed to clock in. It can take up to 15 minutes for a hardware clock to update when the result of the expression changes for any employees.

Clocked In Tab

This tab provides a quick view of employees clocked into the job, as well as members and default members who are not clocked into this job.

Default Members appear bold and italic, where as regular members do not.

The View Violation History link provides the same coverage violation report as mentioned in the Coverage section above.

Allocations Tab

The Allocations tab allows you to allocate the employee's time into categories. Allocations are commonly used in conjuction with grants and are generally displayed on custom reports or custom payroll to show the proportion of time worked in different areas.

• To add, click the Add Allocation button and enter a unique Code, an Amount (this can be a specific amount or a percentage), and an optional Note.
• Click the red X to delete an allocation.

Modifications Tab

From the Modifications tab, you can set up job reassignment and a mininum job time.

• Job Reassignment: When a job is reassigned to an employee, all time worked by any employee on that job will be credited to the selected employee.
• Minimum Job Time: When an employee clocks out of this job, their clockout time will be adjusted if needed to meet the minimum requirement. This rule is applied after every clockout from this job.
  EXAMPLE: If an employee clocks in twice for fifteen minutes each time and the minimum job time is one hour, they will receive two hours worked time.

Tracking Fields Tab

Tracking fields allow employees to provide additional information when clocking in or out.

Leaving these settings blank will have no affect on which tracking fields are visible to the employee, but by adding tracking fields here, you are restricting which fields show for employees clocking in to or clocking out of this job.

• To add, click the Add Tracking Field button.

• Click on the Tracking Field to view the full list of options and select the one you wish to add, then click the Add button.

• To add field options, click the Add Field Option button.

• Click on the Field Option to view the full list of options and select the one you wish to add, then click the Add button.

DISPLAY OPTIONS

Display Options allow you to customize the Jobs table.

• Click the + (plus sign) on the Display Options bar to expand the window.

• Move items from the Available Columns window to the Displayed Columns window by clicking on the desired field to highlight it, then click on the right arrow to move it.
  TIP: You can select multiple items to move by holding down the CTRL key while clicking on the individual fields. All the selected fields will be highlighted.
• To change the order in which the Displayed Columns appear, click on a field to highlight it and then use the Up and Down buttons to arrange the list in the order you prefer.
• Click on the Display button to view the changes in the Jobs table.
• - OR - Click on Save Preset to save your custom view.

  

  • You will be prompted to enter a Name for this Preset. Enter a descriptive name and click OK.

  

  • You will then be prompted to choose between a Personal Preset, Division Preset, or Global Preset depending on which level should show this as an available option.

  

  • To use a saved Preset display, select the Preset name from the pull-down menu. The Jobs list will automatically refresh.
  • Click on the Make Default button to see this custom view each time you return to the Job Adminstration page.

SEARCH OPTIONS

To filter the list below, enter a value in one or more of the following fields and press Search. Use * for a wildcard. Fields left blank will not be used in filtering the list.