Applies to versions: 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2

Enable Remote Services

The Network Clock is primarily used to clock in and out. The clock also offers a System Menu which can be used to configure the device and access other functions. This article covers how to enable Remote Service from your network clock.

In some situations, TimeIPS support may ask you to enable remote service to troubleshoot issues at the clock. To do this, start at the main screen and press Enter without entering a badge number.  Then, go down to Remote Service and press Enter again.  Select Enable and press Enter again.

Remote service will automatically deactivate when the clock restarts.

• System Menu (aka System Admin)
  Press Enter again without a Badge number.
  
  
  
  • Update Settings
  • Configure Network 
  • Play Test Sound
  • Use Biometrics
  • View System Info  
  • Synchronize NTP
  • Fetch Time
  • Set Volume 
  • Set Contrast
  • Test Relays
  • Remote Service
    Enable Remote Service?
    • Enable
      
      • Remote Service has been enabled.
    • Cancel