Applies to versions: 3.2
Restore To Factory Defaults
Restore to Factory Defauts allows the system to be reconfigured as if it were a new system. This will also allow a backup to be loaded. The system will attempt to make a backup prior to erasing all data from your TimeIPS system. If the data in the system is valuable, we strongley recommend you also make a local backup before you proceed.
After performing a reset, the system can be configured as new, or a backup can be loaded.
If you need to permanently erase all data, please contact TimeIPS techincal support.
Using the left pane Main Menu » Administration, click on: System » Backups
At the very bottom of the page is the Full Reset to Factory Defaults (Required to Restore a Backup) section.
- Clicking the Restore To Factory Defaults button will bring up the following prompts.
- If you are absolutely sure you want to Restore to Factory Defaults, click the OK button.
- To really make sure you want to Restore to Factory Defaults, you will be asked again to confirm. Click the OK button to continue.
- Once the Factory Defaults have been restored, click the Reconfigure TimeIPS Server button.
- For instructions on restoring, see the Restoring from a Local Backup article.
©2004-2023 TimeIPS, Inc. All Rights Reserved -
TimeIPS and the TimeIPS logo are registered trademarks of TimeIPS, Inc.
"Intelligent Personnel System" "Run your Business. We'll watch the clock." are trademarks of TimeIPS, Inc.
TimeIPS is protected by one or more patents. Patent No. US 7,114.684 B2.