Time clock systems by TimeIPS
Call Now! 316-264-1600
Information
Sales
Support
Knowledge Base Search:  
Main Menu
· Home

· Table of Contents
· Article Index

· Downloads
· New Features
· FAQ
· News
· Web Links

  
TimeIPS Knowledge Base

Table of Contents: Article IndexPrintable Version

Applies to versions: 1.8, 1.9, 1.10, 1.11, 2.0



Clock In and Out from the TimeIPS Station



Once employees have been entered into TimeIPS with an Employee ID/Badge Number, they can begin clocking in and out. Various employee identification devices are available. Any of the following employee identification devices can be used with any TimeIPS system, although not all are included with every system.

 

Clocking Modes

TimeIPS clocks offer three operating modes:

  • Smart Clocking Only

    If you are only using automatic input devices, such as barcode scanners or proximity card readers, you may wish to use "Smart Clocking Only" in order to disable the explicit "Clock In" and "Clock Out" functions, which are designed to be used with a keypad. Older versions of TimeIPS (Prior to Version 1.6) only supported Smart Clocking mode.

  • Explicit Clocking Only
  • If you have a keypad, you may wish to use "Explicit Clocking Only" to require employees to specify whether they are clocking in or clocking out. This behavior is recommended to help identify missed clocks and simplify those corrections.

  • Both Methods

    By default, both methods are accepted. This allows automatic input devices to work, and allows employees to specify the intent of their clock.

Configure clocking modes under Administration -> Clocking -> Clock Configuration on the Input tab.

The clocking mode can be set per clock, so that clocks with automatic input devices can behave differently than clocks with keypads, if desired.


 

 

Numeric Keypad Overview

 





The keypad is the most common and most versatile clocking device. It allows employees to clock in, clock out, change jobs, check status and enter notes.



 

 

Clock Events Using Keypad in "Smart Clocking" Mode

 

Key Label Key Name Description
/ [Info] Information Code Retrieves clock-in/out status and hourly time information for an employee

* [ID] Time Entry Code Denotes that the following ID number is for time entry
ENTER Enter Key Submits job code and/or ID number combinations to the system
Num Lock (if present) Keypad Lock Locks and unlocks the keypad
Esc (if present) Escape Cancels the current input or exits the current menu
0-9 Number Keys Used to enter ID numbers and job codes
BS Backspace Used to remove last typed character in case of incorrect entry

 

     

  • A successful clock IN or OUT will generate the "In" or "Out" voice confirmation and the LCD will indicate the current date, time, employee name and time IN or OUT.
  • If you mistype when entering any number, use the "BS" (Backspace) key on the keypad to clear incorrectly typed numbers.
  • The NumLock key must be active for proper keypad function.

To Clock-In/Clock-Out Using the Numeric Keypad

  • Type an Employee ID/Badge Number and press [Enter].
    Example: 112233 [Enter]
To Check Clocked In/Out Status and Hours Remaining
  • Type forward slash on keypad followed by an Employee ID/Badge Number and press [Enter].
    Example: /112233 [Enter]
  • NOTE: Hours remaining only display for hourly employees.

 

If your system includes Job Tracking

Clock-In to a Job/Change to a New Job

  • Type the Job Code * and an Employee ID/Badge Number and press [Enter].
    Example: 4567*112233 [Enter]

"Smart Clocking" Keypad Command Examples

 

Employee Enters at Keypad/Keyboard: *

WORK STATUS
OUT IN
ID/BADGE#
[NOTE]++ ID/BADGE#
Clocks employee IN
(To default job, if set. Otherwise, no job)
Clock In note, if set
Clocks employee OUT
Clock Out Note, if set
[JOB CODE] * ID/BADGE#
[NOTE]++[JOB CODE] * ID/BADGE#
Clocks employee IN to the specified job
Clock In Note, if set
Clocks employee OUT, then IN to the specified job
Clock Note on previous Out and new In, if set
[DEPT CODE] ** ID/BADGE#
[NOTE]++[DEPT CODE] ** ID/BADGE#
Clocks employee IN to the specified department
Clock In Note, if set
Clocks employee OUT. Department is ignored.
Clock Note on Out, if set
[WO CODE] * [JOB CODE] * ID/BADGE#
[NOTE]++[WO CODE] * [JOB CODE] * ID/BADGE#
Clocks employee IN to the specified work order and job
Clock In Note, if set
Clocks employee OUT, then IN to the specified work order and job
Clock Note on previous Out and new In, if set
[WO CODE] * [JOB CODE] /[PHASE]* ID/BADGE#
[NOTE]++[WO CODE] * [JOB CODE] /[PHASE]* ID/BADGE#
Clocks employee IN to the specified work order and job on the specified phase
Clock In Note, if set
Clocks employee OUT, then IN to the specified work order and job on the specified phase
Clock Note on previous Out and new In, if set
[DEPT CODE] ** [WO CODE] * [JOB CODE] /[PHASE]* ID/BADGE#
[NOTE]++[DEPT CODE]**[WO CODE] * [JOB CODE] /[PHASE]* ID/BADGE#
Clocks employee IN to the specified department, work order and job on the specified phase
Clock In Note, if set
Clocks employee OUT, then IN to the specified department, work order and job on the specified phase
Clock Note on previous Out and new In, if set
0 * ID/BADGE#
[NOTE] ++0 * ID/BADGE#

Clocks employee IN (to default job, if setotherwise clocks into no job)
Clock In Note, if set

Clocks employee OUT, then IN (to default job, if set, otherwise clocks back into no job)
Clock Note on previous Out and new In, if set
[DEPT CODE] ** 0 * ID/BADGE#
[NOTE] ++ [DEPT CODE] ** 0 * ID/BADGE#

Clocks employee IN (to default job, if setotherwise clocks  into no job) and the specified department.
Clock In Note, if set

Clocks employee OUT, then IN (to default job, if set, otherwise clocks back into no job) and the specified department.
Clock Note on previous Out and new In, if set

* The above commands are followed by pressing [ENTER] on the keypad/keyboard
Note: Job and Work Order functions require IPSJOB and or IPSJWO modules

 


 

Clock Events Using Keypad in "Explicit Clocking" Mode

 

Key Label Key Name Description
/ [Info] Information Code Retrieves clock-in/out status and hourly time information for an employee

* [ID] Change Job Denotes that the employee wants to change jobs
+ [Next] Clock In Denotes that the employee wants to clock in
- [Prev] Clock Out Denotes that the employee wants to clock out
ENTER Enter Key Submits job code and/or ID number combinations to the system
Num Lock Keypad Lock Locks and unlocks the keypad
Esc (if present) Escape Cancels the current input or exits the current menu
0-9 Number Keys Used to enter ID numbers and job codes
BS Backspace Used to remove last typed character in case of incorrect entry

 

     

  • A successful clock IN or OUT will generate the "In" or "Out" voice confirmation and the LCD will indicate the current date, time, employee name and time IN or OUT.
  • If you mistype when entering any number, use the "BS" (Backspace) key on the keypad to clear incorrectly typed numbers.
  • The NumLock key must be active for proper keypad function.
  • Additional data may be gathered after entering the badge number, including department, work order, job and note.  The prompt mode is set per clock, and can be code input, or selection from a list.

To Clock-In/Clock-Out Using the Numeric Keypad

  • Type either + or -, then an Employee ID/Badge Number and press [Enter].
    Example: +112233 [Enter]

To Check Clocked In/Out Status and Hours Remaining

  • Type forward slash on keypad followed by an Employee ID/Badge Number and press [Enter].
    Example: /112233 [Enter]
  • NOTE: Hours remaining only display for hourly employees.

 

If your system includes Job Tracking

 

Clock-In to a Job

  • Type + and an Employee ID/Badge Number and press [Enter]. Then, enter a job code and press [Enter].
    Example: +112233 [Enter]
    Example: 4567 [Enter]

Change to a New Job

  • Type * and an Employee ID/Badge Number and press [Enter]. Then, enter a job code and press [Enter].
    Example: *112233 [Enter]
    Example: 4567 [Enter]
  •  

 

If your system includes Work Orders

 

Clock-In to a Work Order and Job

  • Type + and an Employee ID/Badge Number and press [Enter]. Enter a Work Order code and press [Enter]. Then, enter a job code and press [Enter].
    Example: +112233 [Enter]
    Example: 2000 [Enter]
    Example: 4567 [Enter]
  •  

Change to a new Work Order and Job

  • Type * and an employee ID/badge number and press [Enter]. Enter a Work Order code and press [Enter]. Then, enter a job code and press [Enter].
    Example: *112233 [Enter]
    Example: 2000 [Enter]
    Example: 4567 [Enter]
  •  

 

"Explicit Clocking" Keypad Command Examples

 

Employee Enters at Keypad/Keyboard: *

WORK STATUS
OUT IN IN JOB
+ ID/BADGE# Clocks employee IN Clocks employee OUT, then back IN Clocks employee OUT, then back IN
- ID/BADGE# Clocks employee IN, then back OUT Clocks employee OUT Clocks employee OUT
* ID/BADGE#, JOB# Clocks employee IN to the specified job Clocks employee OUT of the default job, then IN to the specified job Clocks employee OUT of current job and IN to the specified job

* The above commands are followed by pressing [ENTER] on the keypad/keyboard

 

Biometric Reader Overview

 





TimeIPS can validate employee identification using biometric fingerprint/thumbprint authentication. Employees clock in and out of TimeIPS and are asked to present their thumb for validation.



 

TimeIPS offers multiple types of biometric readers, suited to the needs of different businesses. Please review the enrollment and training instructions that are included in the manual that accompanied your biometric device.

Configuration for biometrics are under Administration -> Clocking -> Biometric Validation

See the article on Biometric Validation (keyword "bio") for details.



 

Magnetic Swipe Badge Reader Overview

 





The magnetic swipe badge reader is an optional employee identification device for use with employee magnetic swipe badges.






 

Swiping a Magnetic Swipe Badge

 

When preparing to swipe a badge, be sure that the front of the badge is facing away from the indicator light and the badge's magnetic strip is facing toward the light. Insert the badge starting at either end of the reader slot and swipe completely through it, exiting the other side. If swiped correctly, the reader will beep to indicate success. If there is no beep, you may have the card backward. Turn the badge so that the magnetic strip is facing the indicator light and try again.

If the clock event is successful, an audible tone will be heard for "In" or "Out" and the LCD display will indicate the current date and time, employee name and the time IN or OUT.

 

INDICATOR EVENT DESCRIPTION
Green Light Ready to swipe The reader is ready to read or has successfully read your badge
Audible Beep Successful swipe The reader has successfully read your badge
Red Light Incomplete Swipe Swipe the badge again with a full swipe
Does not blink or beep Badge is backward Reorient the badge so that the back is facing the indicator light and the magnetic strip is fully inserted into the reader

 

 

Setting Up Employee Badges

 

For information on how to set up employee badges, see the article on Setting Up Employee ID and Badge Numbers for Swipe Badge Systems (keyword "badge").



 

Barcode Reader Overview

 





The barcode badge reader is an optional employee identification device for entering employee time and Job Tracking information.



 

Typically, barcode readers are used in "Smart Clocking" mode. A Job or Work Order barcode is scanned first, then a badge with a barcode for the employee's ID.



 

Proximity Card Reader Overview

 





The proximity badge reader is an optional employee identification device for use with employee proximity badges that offers higher-security employee identification.



 

Proximity readers make it fast and easy for employees to clock IN and OUT. In addition, there's no chance of entering an incorrect badge number, reducing errors and saving time for managers.



 

Web Browser Overview

 





The Remote Clocking module allows employees to clock in/out, change jobs and check their status using a computer terminal and web browser.



 

See the article on Remote Clocking (keyword "remote") for details.



 

Telephone Clocking Overview

 





Employees can clock in/out, record a clock note, check current status, and listen to messages.



 

See the article on Telephone Clocking (keyword "phone") for details.

 

 

Wireless Device Overview

 





Wireless devices such as PDA's and web-enabled phones can be used to clock in/out and check status remotely.



 

See the article on Remote Clocking (keyword "remote") for details.

 

 

General Clocking Overview

 





See Also:
TimeIPS Store (1.3, 1.4, 1.5, 1.6, 1.8, 1.9, 1.10, 1.11)

©2004-2023 TimeIPS, Inc. All Rights Reserved - TimeIPS and the TimeIPS logo are registered trademarks of TimeIPS, Inc.
"Intelligent Personnel System" "Run your Business. We'll watch the clock." are trademarks of TimeIPS, Inc.
TimeIPS is protected by one or more patents. Patent No. US 7,114.684 B2.