Applies to versions: 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2

Set Log Level

The Network Clock is primarily used to clock in and out. The clock also offers a System Menu which can be used to configure the device and access other functions. This article covers how to set the Log Level.

In some cases, TimeIPS Support may ask for additional logging to be turned on at the clock.  If so, enter the system menu by pressing Enter without entering a badge number.  Then, go down to Logging.  Select one of the three levels.  Higher levels log with greater detail, but this reduces the amount of time that is stored in the logs.  Logs are only available to TimeIPS support technicians for troubleshooting purposes.

• System Menu (aka System Admin)
  Press Enter again without a Badge number.
  
  
  
  • Update Settings
  • Configure Network 
  • Play Test Sound
  • Use Biometrics
    
  • View System Info  
  • Synchronize NTP
  • Fetch Time
  • Set Volume
  • Set Contrast 
  • Test Relays
  • Remote Service
  • Quick Restart
  • Full Restart
  • Num Lock Warning
  • Offline Punches 
  • Logging
    Set Log Level
    • Level 1
    • Level 2
    • Level 3

See Also:
TimeIPS Network Clock Menu (2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)