Applies to versions: 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2
Check Status at a Network Clock
The Network Clock is primarily used to clock in and out. The clock also offers a System Menu which can be used to configure the device and access other functions. This article covers how employees can check their status from a Network Clock.
Normally, status can be check by entering a slash "/" then a badge number and pressing enter. Status can also be check from the user menu by selecting Check Status.
System Menu (aka System Admin)
- Press Enter again without a Badge number.
- User Menu: Pin Required
If a Badge number is requred, enter it and then hit the Enter key.
If a Pin is requred, enter it and then hit the Enter key. Proceed to System Admin which is the same as the System Menu above.
- Check Status
- View Benefits
- Request Benefits
- System Admin
- User Admin
TimeIPS Network Clock Menu (2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)
©2004-2023 TimeIPS, Inc. All Rights Reserved -
TimeIPS and the TimeIPS logo are registered trademarks of TimeIPS, Inc.
"Intelligent Personnel System" "Run your Business. We'll watch the clock." are trademarks of TimeIPS, Inc.
TimeIPS is protected by one or more patents. Patent No. US 7,114.684 B2.