Applies to versions: 2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2

Check Status at a Network Clock

The Network Clock is primarily used to clock in and out. The clock also offers a System Menu which can be used to configure the device and access other functions. This article covers how employees can check their status from a Network Clock.

Normally, status can be check by entering a slash "/" then a badge number and pressing enter.  Status can also be check from the user menu by selecting Check Status.

System Menu (aka System Admin)

• Press Enter again without a Badge number.
  
• User Menu: Pin Required
  If a Badge number is requred, enter it and then hit the Enter key.
  
  If a Pin is requred, enter it and then hit the Enter key. Proceed to System Admin which is the same as the System Menu above.
  
  
  
  • Check Status
  • View Benefits
  • Request Benefits
  • System Admin
  • User Admin

 

See Also:
TimeIPS Network Clock Menu (2.1, 2.2, 2.3, 2.4, 2.5, 3.0, 3.1, 3.2)